The conveyor system in your manufacturing or industrial facility is like the lifeline of your business. They carry materials and products to the various locations in your processing center or warehouse. Once you buy a new conveyor belt in Oglesby, IL, you’ll want to ensure it will last as long as possible. You can rely on your belts for longer by following a few simple steps in caring for them.
Adjust the System
Before you install a new belt, you should take the time to ensure the system is operating properly. Over time, your old belts caused minor shifts to the conveyors that have offset the whole system. If you install new belts without restoring those original settings, the system won’t function properly. This will cause your belts to suffer faster wear and tear.
Apply Proper Tension
While your belts require some degree of tension to function properly, too much tension will cause damage to the system. The belts will pull apart, damaging the lacing. Additionally, the system’s bearings, rollers, and other components will become damaged. You should keep the tension of your new belts between 0.4% and 0.7% elongation to maintain a proper balance.
Keep Them Clean
In addition to removing debris from your new conveyor belt in Oglesby, IL, you should schedule routine cleaning. This involves loosening the belts to make it possible for both sides of the belts to be thoroughly washed and dried. Be sure to follow the manufacturer’s suggestions in regards to the proper cleaning solutions to use on your new belts.
When you need replacement gearboxes, pumps, or conveyors for your industrial facility. Follow us on Facebook.