Why Should A Plumber Hook Up A Walk-In Bathtub When It Can Be DIY?


Today’s Baby Boomer generation is opting to age in place. Seniors need bathroom innovations like walk-in bathtubs to prevent falls and injuries. It requires a plumbing contractor in Atlanta, Georgia, to get it right instead of doing it yourself. Why?

Drainpipes Size

Walk-in tubs have been known to drain harder than ordinary tubs, which means existing pipes can’t handle the water pressure. It is recommended for tub/shower combinations to use 1 ½ diameter drainpipes and a P-trap, but two-inch pipes are better. A vent pipe attached to the drainpipe is also required.

Size of Pipes Of Water Supply

Hot and cold water entering the tub/shower combo usually enters through half-inch pipe. Three-quarter inch pipe from the water source to half-inch pipe at the faucet offers better water flow into the walk-in tub.

Water Pressure

Fill and drain times in walk-in tubs are generally seven to ten minutes. This leaves bathers cold during filling and wet and cold during draining. Technology has changed, so now the drain and fill times are two to five minutes. The right size pipes, as described above, are essential to the water pressure necessary to fill and drain in two to five minutes. A plumbing contractor in Atlanta, Georgia, knows how it’s done.

Previous Water Damages

Unfortunately, the plumbing is covered with drywall, so any damages take some time to become visible. It generally becomes visible in another room, so the homeowner would never know the origin of the damage until he bought a new bathtub. This discovery will take the plumber time to fix before he can concentrate on the walk-in tub. Few homeowners figure damages into the budget, but a plumber will tell him that’s the first thing he needs to consider before installing a walk-in tub. Rooter Plus can tell you more when you call to learn more about it.