Important Information About Tree Cabling in Wamego, KS

Tree Service

Growing trees are often unable to support themselves under the excess weight, and often require some sort of intervention. Otherwise, the tree might get uprooted and fall on the side. A simple process to prevent this from happening is tree cabling in Wamego, KS. The process is pretty straightforward, and involves the use of cables to stabilize a tree that needs correction. If the process is not completed with care, it could lead to girdling, and that is one of the main reasons why you should not attempt cabling on your own. Instead, it’s best to call a local company that offers tree cabling and maintenance services for the job.

How Is it Done?

The process is done by drilling holes in the trunk of the tree. Once that is done, an arborist will insert a cable in the trunk and then secure it properly. By securing the cable, the arborist will ensure that it remains as taut as possible, thus, keeping the cabling tight and the tree in position. Many people often confuse cabling with staking. Both are very different procedures, since staking happens under the ground and involves anchoring the tree in position, whereas cabling happens above ground. You can contact a local company such as Hummel Tree Service to get your trees cabled.

How to Know When Cabling Is Needed

There are some pretty obvious signs that you need to look out for, which indicate the need for cabling. For starters, if your tree is tilting toward one side excessively, it clearly indicates the need for tree cabling. Even if you have doubts, it’s best to get in touch with an arborist who will check the tree and give you their recommendations. You can also connect them Facebook.