One of the first things that you must do when beginning a woodworking project is to choose the right type of wood for your project. There are many beautiful types of lumber in Laguna Niguel CA, so you’ll want to spend at least a little bit of time narrowing down your choices.
The first step toward choosing the right lumber for your project is to establish a good picture in your mind of how your finished job should look. You will also want to carefully consider where the project will be kept and how it will be treated. For example, if you are building a cabinet or a table for the kitchen, then you’ll want to be sure that the color of the hardwood fits in with the rest of your décor and that the wood and its finish can withstand the amount of abuse it’ll be exposed to. A beautifully worked hardwood ceiling will generally have more protection from abuse, but the overall color of the wood might have a greater impact on the feel of the room. There are many types of lumber in Laguna Niguel CA to choose from, so it shouldn’t be too hard to get the wood that you want.
After narrowing your choices in lumber down according to your taste preferences, you’ll need to be sure that the wood you are considering is appropriate for the project you have in mind. You will want to select the type of lumber based on its workability. Do you intend to use nails or screws for your project? Do you need a wood that won’t bend or are you hoping for wood with some flexibility and give to it? Some woods accept stain better than others and some of your choices might be too expensive for the type of project you have in mind.
Your next step will be to determine the moisture content of the wood. Before you begin the project, the wood will need to be at least 9 – 11% dry. You can verify this with a good quality moisture meter. However, if you are buying lumber in Laguna Niguel CA from a reputable seller, then the wood has probably reached the appropriate dryness before you even get to see it.
The next step may have a great influence on the outcome of your project. This step is to determine the grade of lumber that you want for your project. The grading system might seem a little bit confusing because different types of lumber are graded in different ways and labeled with a variety of letters and numbers such as FAS, A-1, or #1 common. If you are buying your hardwood lumber from an experienced retailer, then you may only be offered premium lumber. This means that the retailer has sorted through the lumber by hand and weeded out any wood that doesn’t live up to a high standard.