Tropical breezes are a lovely thing. But, if your home or office doesn’t get enough of a breeze to keep you cool, you know how valuable your air conditioner is. You also know that life can be miserable if it’s broken. Most Air Conditioning Repair Honolulu requires a trained professional, but you can troubleshoot the problem. Even if you can’t eliminate the need for a service call completely, you can give the repair company valuable information so they are better prepared once they get there. Here’s what to do if the unit will not come on at all.

When you turn the unit on, absolutely nothing happens. This can be caused by a number of things, but when troubleshooting, always start with the easiest to fix. Check the switch on the unit itself, it usually looks like a standard light switch. This could have easily gotten bumped into the OFF position. Next comes the circuit breaker or fuse. These are fairly easy to check, and even fix, yourself. First make sure the unit is switched off. Then look for a tripped breaker and turn it on. If you have a fuse box, replace the blown fuse with a new one of the same capacity. Once that’s done, turn the unit on. If it works through several cycles, you are probably good to go. If it trips the breaker or blows another fuse, turn it off and call the service company, as this is a sign of something more serious.

If the breakers and fuses are fine, there may be a problem with the thermostat. If it isn’t calibrated properly, it might not come on even if it is set lower than the current ambient temperature. To test this, try dropping the setting by five or ten degrees. If the unit comes on, you know the problem is in the thermostat, and you should consider getting it repaired. If it is old, replacing it with a programmable one will save energy as well.

If all of the above fail to get the unit working, call a professional. When in need of Air Conditioning Repair Honolulu, residents trust the experts at Air Source Air Conditioning to help them chill out. If you have taken the time to troubleshoot your problem, you will be better equipped to communicate with them, and you will have a better understanding of the repairs needed.