When buying a home it is important to make sure everything is in good condition. The gutters on a home have a very important job to do. They help water pass through on to the ground so that it doesn’t back up onto the roof and cause leaking or crack the foundation of your home. Sometimes these gutters get clogged with leaves and debris. Gutter guards Indianapolis can prevent this from happening. Here is what you need to look for when installing gutter guards.

Make sure you look at the price. They can cost as much as $40 a foot, while others can be as low as $12 a foot. It depends on the type and how much you need. Make sure you find one with a good warranty. There are may different types of warranties out there, so do your research. You also need to look for water capacity. The system needs to hold at least 10 inches of rain per hour. That is the maximum capacity that it should be able to handle. If you have a roof that is made of anything other than asphalt, you need to find gutter guards in Indianapolis that will adapt to your type of roof.

Check the surface areas of the gutter. Any hole in the cover can cause a clog, so the cover needs to be solid with a solid opening on it. Just about any gutter guard can clog at some time or another, so getting a Valley Controller can help prevent clogging. Valley Controllers usually handle all of the water flow to prevent clogs. Make sure to get the right type of components to attach your gutter guards with. Most are made with aluminum or plastic. Your best bet would be to go with stainless steel. These are more likely to last longer.

You do not need tools to install gutter guards and it is easy to do. Gutter guards can also fit on any gutter, and are well hidden to save the overall look of your home. If you do the research, use the right materials, and do the proper maintenance, your gutters can last for many years to come.