Electric service is a variety of procedures that are used to test and repair the electrical wiring and fixtures in your home or business. To understand the need for these services you need to know a little about how electrical wiring works. The electrical system in a home or office is separated into different circuits. This allows the user to place a variety of electrical appliances throughout the building without placing an extreme load on the electrical system. This type of separation keeps the wiring from becoming overheated due to excess electric flow. The other reason for segregating wiring like this is to avoid a cascading failure when something goes wrong. Each individual circuit is controlled by a breaker with a maximum amperage level. The typical circuit will be fifteen or twenty amps with larger breakers for high voltage appliances.

The average home or small business may require electric service in Wichita Kansas for things like circuit overload or the installation of additional electrical lines. There are several things that can cause an overloaded circuit. The most common are too many appliances connected to the same set of power outlets or an old and worn circuit breaker. The latter tends to occur after the circuit has been overloaded too many times. Your electrician can fix the situation with the installation of one or more additional circuits. This will give you extra electrical outlets to spread out the power draw.

A business may need an Electric service in Wichita Kansas for any number of reasons including the installation of new equipment. Expanding a business usually means the purchase of machines to deal with higher production. Even the installation of new computer systems may require additional electrical circuits. In many cases the new machines may require high voltage lines that need special handling. For example, installing a lathe or mill in a machine shop often requires the power be tapped from a bus bar. That circuit must then be wired to a breaker switch to allow the power to be turned off whenever required and the capability of overload protection. It is also important that these installations be handled by an expert because there are specific guidelines that the electrician must follow to ensure that each circuit is both reliable and safe.
Contact an electric service company