Google+  

aluminum

Comparing Aluminium Plates For Specific Projects

Buying aluminium plate requires the buyer to know the specifics of the project, job or application before choosing the right type of plate. This is essential not only to have the ideal material to work with but also to make sure the plate is the right match for the job and the specifics of the environment where it will be used. In general, all types of aluminium plates, particularly precision cast or cast tool and jig plate, is going to be highly stable. This means that after the plate has been cut or machined there will not be any issues with warping, twisting or deformation of the plate. This can occur with other types of alloys and will require additional milling, finishing or other operations. Without the need for any additional services to the parts, the cost and time of production are lower. This means production savings for the fabricator or manufacturer that can be translated into more competitively priced end products. Comparing Aluminium Plates It can be a challenge to compare aluminium plates unless you are able to look at all the desired or necessary factors against the options. In general and for most applications, processing characteristics will be critical as well as size, actual alloy composition, physical properties, mechanical properties, and tolerances. Most of the quality aluminium plate produced in the United States as specialty precision plate will be considered very good to excellent with regards to weldability by WIG/MIG welding techniques. Not all will be suitable for resistance welding, so this may be an important consideration. Generally, all will be highly machinable and will have some level of corrosion resistance to inland and marine atmosphere. If one type of plate doesn’t have this level, finishing can be used to develop a suitable coating for any type of protection...

Read More

Mistakes To Avoid When Choosing Aluminum Busbar Suppliers

More electricians and electrical contractors are moving to aluminum from the traditional types of copper busbars used from the 1970s onwards. While copper offered a lightweight and relatively durable option, working with copper was costly and also had its limitations. This created a very real demand for lower cost aluminum busbar. This could be used in both horizontal profile systems with vertical connections. It also made it possible to accommodate a range of different current ratings with ease. The increase in demand for this material created a need to find reliable aluminum busbar suppliers. Simply using standard electrical contract suppliers often cause more problems with in-stock inventory, inability to get quantities of busbar required and even issues with the quality of the busbar delivered. If you are in the market for aluminum busbar, there are some important mistakes to avoid when comparing aluminum busbar suppliers. Quality of Aluminum Often very low prices offered by aluminum busbar suppliers means a lack of quality control. These companies, often suppliers and not manufacturers, may buy from both domestic and international mills, which can result in variability in the aluminum and the processing between orders. When there is variation, it can create problems with weldability as well as the conductivity of the busbar. As this variation will result in the need for replacing components at some point, the slight cost savings can easily end up costing you money. Delivery and Service Focus It is also important to avoid the mistake of not talking to the supplier about their shipping practices and their customer support. Some suppliers will be able to provide value added services such as cutting to length, machining or even assisting your staff in choosing the correct alloy for specific types of applications. For a full range of services, avoid the supplier that are limited in their ability to act as an asset for your company. Quality suppliers make it a focus to provide quality customer service that benefits their customers both large and...

Read More

How to Avoid Left-Over Material?

Finding a way to recycle and reuse leftover material can have a positive impact on your year-end financial data. Don’t know where to start looking? Here are a few handy tips to point you in the right direction: Look for specialized services Some of these services—like nesting—can help you reuse any leftover materials you have. As a result, you can look forward to massive cost-savings, especially when it’s time to put in a call for new aluminum mold plate orders. Since the first rule to any business is to learn how to manage your costs, this is a good step in the right direction, says Smart Business Online. Compare costs After looking around and putting enough options on your list, time to narrow it down. Filter your choices by comparing costs. Don’t automatically reach for the cheapest option. You might think you’re being cost-effective. But if the quality of your aluminum mold plate orders turn out bad, then you will have to cover those replacement costs. Those are extra expenses you can live without. So don’t pay for more than you have to. Go with a supplier with reasonable rates instead. Go with quality results In the end, though, nothing beats the rest of the competition quite like superior quality. So make sure that’s the kind of quality you can get from your supplier. Pre-shaping services or not, if the end result isn’t anywhere near superior, then you’ll need to start looking around until you do find a supplier that can provide you with those services and the results you need. Don’t make compromises on quality just to save up on costs. If you do, you could end up losing your customers and hurting your bottom line. So don’t let those left-over materials go to waste. Reuse them with the help of the right nesting service...

Read More

Outdoor Furniture Made Easy With Aluminum Tubing And Tubing Connectors

If you are a true do-it-yourselfer, you probably have some great ideas to improve on styles and designs of traditional aluminum lawn furniture. With the new emphasis on the retro or vintage look, this is a perfect time to take on a project that will be a lot of fun and requires very few tools. Ideally, first use a current lawn chair, bench or table as a guideline for measurements. There are also some free software tools available online that will allow you to design a chair or table and have the measurements calculated for you, making the math very easy. Supplies You will need to choose your aluminum tubing size and then also choose the right tubing connectors. These connectors will allow the frame of the chair, table or bench to simply snap into place. There will be one of the various types of tubing connectors per area where more than one element of the frame join together. The good news is that with all the options in shapes and styles you will find the pre-made connector you need just by browsing through the online inventory from an aluminum dealer. Tools It is a good idea, if you are ordering tubing and connectors from the same company, to have the aluminum custom cut to your measurements. Although aluminum is softer than most metals, it can be challenging to cut at home and will require the use of a cutting oil, a hacksaw or a circular saw with a suitable blade and also a series of clamps or a guide to hold the pipe during the cutting process. You may also want to rent a pipe cutter for this process. It will be important not to apply too much pressure as this can deform the area of the aluminum under the cutter, causing problems with the correct fitting of the tubing connectors. Another factor to keep in mind is that you will need to deburr the edges of the cuts. This will be important as these areas are very sharp and could easily cut people using the table, chair or other item. Before assembling the lawn furniture of your design, you will need to consider if you want to leave the aluminum natural or paint it. If you want to create a durable surface you can have it anodized and finished, even choosing a color that will perfectly match your...

Read More

What You Need To Know About Aluminum Busbar Suppliers

Copper was originally considered to be the top choice in busbar metals back in the 1970s. These early busbars were most often found in switchboards where low voltage was required. Later, in the 1980s the demand for busbars that could be current-rated increased, but they were also difficult to work with and the horizontal configuration was not the best option for the much larger applications. In the 1990s the use of aluminum to create vertical busbars changed the entire look of the configurations. This included the option to have different current ratings to satisfy different requirements with various applications. Today, there are aluminum busbar configurations that are combined horizontal and vertical configurations. This is much more compact and provides a greater design possibility with a wider range of current ratings while keeping the system compact. Why Use Aluminum? There are several reasons to turn to aluminum busbar suppliers over copper suppliers. Aluminum is lightweight and can result in systems that are up to 70% lighter than the same system in copper. It is also softer and easier to work with and can be created in custom extrusions to give just the shape required for any system. Also, and this has always been an advantage with aluminum, it is excellent at heat dissipation. This is important in complex configurations where heat dispersal is essential to maintain the system. It is also highly conductive, making it a perfect option for this type of application. The lower price is also a factor that many consider as a top reason to use aluminum over copper. To add to this higher corrosion resistance and the ability to use inside or outdoors makes this a very good choice. Choosing a Supplier It is important to keep in mind that not all aluminum and not all aluminum busbar suppliers are the same. Working with professionals that have an in-depth understanding of the different alloys and the specific properties of each alloy can be instrumental in getting the right aluminum busbar for your specific job. Look for aluminum busbar suppliers producing a product that has value-added considerations. This can include specific types of busbar that can decrease energy loss, offer high levels of weldability and have exceptional thermal and electrical conductivity. Comparing products and finding out which suppliers have the superior product that is a good match for your requirements will be important. You will find these suppliers start with superior quality material to create their busbar products, providing a consistent, stable and flat busbar that is a clear difference to low-quality products on the...

Read More

What is a Slatwall Track?

The walls of commercial, industrial and residential buildings are often equipped with one or more slatwall track. These tracks are used in the displaying of a wide variety of items off the building floor. The items may be all the same, such as a merchandise display in a retail store like shoes. In some cases, the items on display can be different sizes, shapes, types and weights, such as tools in a workshop or garage like hand tools and gardening tools. A slatwall track is made of plastic, metal alloy or metal. The extrusion process is used to form the hardware. In general, the tracks are secured to the building structure, including both permanent as well as temporary walls. The walls may be covered with wallboard, but not in every instance. Screws are used to attach the track directly to the wall, either to the existing frame or the studs used for holding the wallboard. Provide a Neat, Clean Environment In many cases, the track interlocks with lower and upper tracks that are similar. Often times, there will be a space left between the tracks. When this is the case, the spacing will have to be uniform in order to provide a surface that is both level and pleasing to the eye. When a slatwall track is mounted to the wall of a garage or workroom. The primary goal is to create a more pleasant and appealing environment. In general, the option is limited to using wallboard that typically will need to be painted. In the event that a slatwall display is on more than just a single adjoining wall, it is best to begin the process in a corner and then work your way out from there. In addition, you will need to take into account any obstacles, such as doors, windows and other fixates prior to installing your slatwalls. The panels can be cut to the right size with the use of the saws. Once the slatwall panels have been completely install, you will be able to add any accessories or fixtures that you like to the t-slots and enjoy. A slatwall track is incredibly simple to install. The best part is that this is a display that is going to last for many years. Therefore, the installation is well worth any time and money that is spent to install the slatwall of your...

Read More

Categories

Pin It on Pinterest

Copyright Base Articles © 2011 - 2017. All Rights Reserved